Table of Contents
Advertisement
Chapter 2 – Installing the Modem
Your modem is installed and ready to use.
After the installation is completed, test the operation of the MT9234MU by registering it. Open a browser, go to the
following address and follow the on-line instructions:
Configuring the Modem for Your Country
Different countries have different requirements for how modems must function. Therefore, before you use the modem,
you must configure it to match the defaults of the country in which you are using it. You can configure the modem manually
using AT commands or with the Global Wizard. Both methods are described in the sections that follow.
Installing and Using the Global Wizard to Configure Country Code
This section describes how to install the Global Wizard program, and then how to use the Global Wizard program. The
Global Wizard program helps you configure your modem's homologation parameters for the country in which you want to
operate the modem.
If your computer is running the Windows 2000 operating system or newer, it is recommended that you use the Global
Wizard program.
To install the Global Wizard program:
If you have not already done so, download the file Global Wizard from the Multi‐Tech website.
1.
From the location where you stored the download file, double click the global wizard icon.
2.
In the dialog box that appears, click Run.
3.
The Welcome pane of the Global Wizard Setup wizard appears. Click Next.
4.
A License Agreement wizard pane opens. If you accept the agreement, click Yes.
5.
In the next pane of the wizard, select the location where you want to install Global Wizard. If desired, navigate to the
6.
location where you want to install. Otherwise, maintain the default location. Click Next.
The installation proceeds, and then completes.
7.
●
Select the Yes, I want to restart my computer now radio button.
At the InstallShield Wizard Complete pane, click Finish.
●
After the computer reboots, you can use the Global Wizard to configure your modem's homologation parameters.
8.
To use the Global Wizard program:
From the Windows Start button, select All Programs, the Global Wizard folder and GlobalWizard.
1.
The first pane of the Global Wizard opens. Click Next.
2.
In the next wizard pane, select port associated with the modem that you want to configure. Click Next.
3.
14
http://www.multitech.com/register
U
MT9234MU-CDC-XR User Guide
Advertisement
Table of Contents
