Configuration And Setup Of The Gateway Plus; The Web Server; Web Server Properties - Monico CDL Gateway Installation And Operation Manual

6 Configuration and Setup Of The Gateway PLUS

Note: The following features are available on Monico Gateway Plus (GT) Models ONLY.

The Web Server

The Monico Gateway's web server can be used to expose various data via TCP/IP connections. This allows
remote access to the unit's virtual HMI for remote monitoring and/or notifications. The web server is
configured by selecting the Web Server category in the Navigation Pane.
Important Note
While MonicoView II provides a variety of protection mechanisms to limit access to the web server, you
should use good engineering practices when designing your system. This means that you should avoid
performing any safety-related operations via the web server, and you should ideally use an external
firewall to prevent unauthorized access in case MonicoView II's own security protections are breached.
Security is ultimately your own responsibility, and Monico does not recommend that you rely solely on
MonicoView II's own security measures

6.1.1 Web Server Properties

The web server's properties are accessed from the root entry of the Navigation List.
Figure 16
V1.03
15.4.29
- 22 -