Table of Contents
Advertisement
Quick Links
Model PC10 - Protocol Converter and Data
Acquisition System
Installation Guide
z Configured using MonicoView 3.1 software
z Two serial communication ports,
(1 RS-232 and 1 RS-232/422/485)
z 10 BASE-T/100 BASE-TX Ethernet port communicates with up to
four protocols simultaneously
z Unit's configuration is stored in non-volatile flash memory
z SD card socket for loading database in field
z Rugged IP40-rated enclosure
z Three front face LED indicators
z Supports over 300 industrial protocols
z Power unit from 24 ±20% VDC
U L
C
US LISTED
R
IND. CONT. EQ.
E302106
GENERAL DESCRIPTION
The PC10 data station performs the functions of a multiple protocol
converter, using two high-speed serial communications ports and a 10
Base T/100 Base-TX Ethernet port. The Ethernet port supports up to four
protocols simultaneously, allowing dissimilar Ethernet based products to
communicate with one another, including PLCs, motor drives, bar code
scanners, etc. The SD card slot can be used to load the unit's configuration
file, allowing configuration changes to be made and saved to the card for
later transfer.
The PC10 is programmed with Monico's MonicoView 3.1 software.
MonicoView 3.1 offers easy to use drag and drop communications
configuration and is available as a no charge download from Monico's
website.
DIMENSIONS In inches (mm)
5.03
(127.7)
3.99 (101.4)
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear
in this document or on equipment must be observed to ensure personal
safety and to prevent damage to either the device or equipment
connected to it.
Do not use the unit to directly command motors, valves, or other
actuators not equipped with safeguards. To do so can be potentially
harmful to persons or equipment in the event of a fault to the unit.
CAUTION: Risk of Danger
Read complete instructions prior to installation and operation
of the unit.
ATTENTION : Risque de danger
Lire les instructions complètes avant l'installation et l'utilisation
de l'appareil.
CONTENTS OF PACKAGE
- PC10
- Terminal block for connecting power
ORDERING INFORMATION
For a quote or ordering information, please contact your Monico Sales
Engineer at
sales@monicoinc.com
the correct preconfigured solution for your application.
1.25 (31.8)
1
Installation PC10-A
Drawing No. LP1125
Effective 1/20
or 281-350-8751 option 3 to determine
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Monico PC10
Summary of Contents for Monico PC10
- Page 1 E302106 GENERAL DESCRIPTION SAFETY SUMMARY The PC10 data station performs the functions of a multiple protocol All safety related regulations, local codes and instructions that appear converter, using two high-speed serial communications ports and a 10 in this document or on equipment must be observed to ensure personal Base T/100 Base-TX Ethernet port.
- Page 2 This device is open-type and must be mounted in a suitable dust-tight Figure 1 - Attach PC10 to DIN Rail end-enclosure in accordance with articles 500 and 502 of the National Electric Code (NEC).
- Page 3 EMC INSTALLATION GUIDELINES Although Monico products are designed with a high degree of immunity to Electromagnetic Interference (EMI), proper installation and wiring methods must be followed to ensure compatibility in each application.
- Page 4 The card is inserted properly when the end of the card is flush The PC10 is configured using MonicoView 3.1 software. MonicoView with the PC10 case. To remove the SD card, push in slightly on the card. 3.1 is available as a no charge download from Monico’s website.
- Page 5 Drawing No. LP1125 RS232/RS422/485 COMMS PORT Examples of RS485 2-Wire Connections The one logical serial port of the PC10 can be used as a RS232 or RS422/485 port. There is a separate RJ connector for each option. In PC10 TO RJ11...
- Page 6 A battery is used to keep time when the unit is without power. The recommended by the manufacturer. battery of a PC10 unit does not affect the unit’s memory, all configurations ATTENTION: Pile au lithium. Danger d’explosion en cas de and data is stored in non-volatile memory.
- Page 7 Effective 1 2020 Drawing No. LP1125 This page intentionally left blank.
- Page 8 LIMITED WARRANTY (a) Red Lion Controls Inc. and Monico Monitoring Inc, (the “Company”) warrants that all Products shall be free from defects in material and workmanship under normal use for the period of time provided in “Statement of Warranty Periods”...
Need help?
Do you have a question about the PC10 and is the answer not in the manual?
Questions and answers