Polycom VVX 300 Administrator's Manual page 16

Polycom® VVX® 300, 310, 400, and 410 Business Media Phone Administrators' Guide
derived configuration until you delete them by selecting Reset Local Configuration
from the phone's menu, or configure
reset web and local configurations and more information on <device/> parameters,
see the latest Polycom UC Software Administrators' Guide.
To configure the phone through the Web Configuration Utility:
1 Obtain your phone's IP address.
To see the phone's IP address, select
and select Status > Platform > Phone. Scroll down to see the IP address.
2 Enter the phone's IP address in the Web browser's address bar. The following figure
shows a sample IP address in the Web browser's address bar.
3 Press the Enter key. The Utility login screen displays, as shown next.
4 Select Admin or User, and enter the appropriate password. The Utility's Home screen
displays.
The default password for an administrator is 456. The default password for a user is 123.
5 Make the desired configuration changes to the phone's configuration.
6 Press Save.
8
parameters. For instructions on how to
<device/>
or from the phone's Home view,