Configuration Parameter Changes; Power Saving <Powersaving - Polycom VVX 300 Administrator's Manual

Configuration Parameter Changes

The following configuration parameter changes and additions were made to support the VVX
300, 310, 400, and 410 phones:
•
Power Saving <powerSaving/>
•
User Preferences <up/>
Power Saving <powerSaving/>
The power saving feature automatically turns off the phone's LCD display when it is not being
used.
Table 2: Power Saving Parameters
Parameter
powerSaving.enable
If 0, the LCD power saving feature is disabled. If 1, the feature is enabled.
powerSaving.idleTimeout.offHours
The number of minutes to wait while the phone is idle during off hours before activating power saving.
powerSaving.idleTimeout.officeHours
The number of minutes to wait while the phone is idle during office hours before activating power saving.
For the VVX 1500, the default value is 10 minutes.
powerSaving.idleTimeout.userInputExtension
The minimum number of minutes to wait while the phone is idle — after the user uses the phone —
before activating power saving.
powerSaving.officeHours.duration.monday
powerSaving.officeHours.duration.tuesday
powerSaving.officeHours.duration.wednesday
powerSaving.officeHours.duration.thursday
powerSaving.officeHours.duration.friday
powerSaving.officeHours.duration.saturday
powerSaving.officeHours.duration.sunday
The duration of the day's office hours.
powerSaving.officeHours.startHour.xxx
The starting hour for the day's office hours, where xxx is one of
, , and
friday saturday sunday
(refer to
powerSaving.officeHours.duration
Permitted Values
0 or 1
1 to 10
1 to 600
1 to 20
0 to 24
0 to 24
0 to 24
0 to 24
0 to 24
0 to 24
0 to 24
0 to 23
,
monday tuesday
for an example.
Default
0
1
480
10
12
12
12
12
12
0
0
7
, , ,
wednesday thursday
5