Basic Operations
Basic Operations
How to reset your unit
If the unit fails to operate properly, press the reset
button.
Turning on the power
Turning off the power
(Hold)
Putting the unit in standby
1
Display the source/option selection
screen.
On the Home screen, touch as follows:
4
ENGLISH
2
Put the unit in standby.
On the source/option selection screen, touch as
follows:
Turning off the screen
On the pop-up short-cut menu
1
Display the pop-up short-cut menu.
DDX4018DAB/
DDX318BT
DDX4018BT
2
On the pop-up short-cut menu, touch as
follows:
To turn on the screen: Touch the screen.
On the monitor panel
(Only for DDX4018DAB/DDX4018BT)
(Hold)
To turn on the screen: Press and hold DISP OFF on
the monitor panel or touch the screen.
Adjusting the volume
DDX4018DAB/DDX4018BT
You can adjust the volume (00 to 35) by turning
the knob to the right to increase and to the left to
decrease.
DDX318BT
You can adjust the volume (00 to 35) by pressing
increase and pressing
K
to decrease.
J
• Holding
increases the volume continuously to
level 15.
Attenuating the sound
(Only for DDX4018DAB/DDX4018BT)
(Hold)
The ATT indicator lights up.
To cancel attenuation: Press the same button again.
J
to