Kenwood DDX4018DAB Instruction Manual page 23

Radio Radio
Selecting a preset station
1
Select the band, then display the preset
station window.
On the source control screen, touch as follows:
2
Select a preset station.
E.g. Preset station window for DDX4018BT
To hide the window: Touch [ ].
Settings for other FM Radio Data System
features
1
Display the <Radio Mode> screen.
On the source control screen, touch as follows:
2
Make the settings.
<AF Regional>
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in
to another FM Radio Data System station of the
same network, possibly broadcasting the same
program with stronger signals— Network-Tracking
Reception.
Selects the Network-Tracking Reception mode.
• AF: Switches to another station. The program
may differ from the one currently received. The
AF indicator lights up.
• AF Reg (Initial): Switches to another station
broadcasting the same program. The AF indicator
lights up.
• OFF: Deactivates the function.
The RDS indicator lights up when the Network-
Tracking Reception is activated and an FM Radio
Data System station is found.
<NEWS>*
• 00min to 90min: Activates New Standby
Reception by selecting the period of time to
disable the interruption. The NEWS indicator
lights up.
• OFF (Initial): Deactivates the function.
<Local>
• ON: Tunes in only to FM stations with sufficient
signal strength. The LO.S indicator lights up.
• OFF (Initial): Deactivates the function.
<Auto TP Seek>
• ON (Initial): Automatically searches for a station
with better reception for traffic information if the
current reception of current station is poor.
• OFF: Deactivates the function.
* The volume adjustment for Traffic Information is automatically
memorized. The next time the unit switches to Traffic
Information, the volume is set to the previous level.
ENGLISH 19