Basic Operations
Basic Operations
How to reset your unit
If the unit fails to operate properly, press the reset
button.
Turning on the power
Turning off the power
(Hold)
Putting the unit in standby
1
Display the source/option selection
screen.
On the Home screen, touch as follows:
4
ENGLISH
2
Put the unit in standby.
On the source/option selection screen, touch as
follows:
Turning off the screen
On the monitor panel
(Hold)
To turn on the screen: Press DISP OFF on the
monitor panel or touch the screen.
On the pop-up short-cut menu
1
Display the pop-up short-cut menu.
2
On the pop-up short-cut menu, touch as
follows:
To turn on the screen: Touch the screen.
Adjusting the volume
DDX419BT/DDX419BTM
You can adjust the volume (00 to
35) by pressing
J
K
pressing
to decrease.
• Holding
J
increases the volume
continuously to level 15.
DDX4019BT
You can adjust the volume (00
to 35) by turning the knob to the
right to increase and to the left to
decrease.
Attenuating the sound
DDX419BT/DDX419BTM
DDX4019BT
(Hold)
The ATT indicator lights up.
To cancel attenuation:
For DDX419BT/DDX419BTM: Press and hold the same
button again.
For DDX4019BT: Press the same button again.
to increase and