Front Display Features; Connections; Mercury Mk2 6-5E And 6-5M - Resource Data Management PR0750-MOB Installation & User Manual

Mercury 2 & Intuitive Mobile Controller User Guide

Front Display Features

LED's: -
Cooling
(Relay 1 or 4)
Fans (Relay 2)
Lights (Relay 3)
Defrost (Relay 5)
On-Line
Off No network attached
Flashing Attempting to Log on to network
Steady On-line
Service
(See Parameter
18 for setup)
Alarm
HACCP

Connections

Mercury Mk2 6-5E and 6-5M

Input and Output connections are made to the back of the controller, the RS232 communication port is on the side. The
diagram shows the connection detail.
Warning
Ensure that all power is
switched off before
installing or maintaining
this product
Please Note
Description
Intuitive Internal IP Network Card Interface Kit
Intuitive Internal RS485 Network Card Interface Kit
Intuitive Internal Wireless Mesh Network Card Interface Kit
Temperature
Probe
Connections
Keys
Enter Up
Note: Function keys illuminate when pressed, illumination is turned off 20 seconds
after the key is used. Press and hold the defrost button to force a manual defrost
Main Display
4 character LED display, used to display temperature and status messages.
Note the Intuitive Mercury display is Green in colour when lit.
Revision 1.1
Part Number
PR0770
PR0771
PR0772
Down Defrost
Page 5 of 21
www.resourcedm.com
Relay
Connections