Aruba A200 Configuration Manual page 6

Connecting to the Mobility Controller
6
Command, comment, and screen text key
In the sections below you will find commands, comments, prompts,
system responses, or other screen-displayed information involved in
the configuration process. This key explains the text styles and
symbols used to denote them.
Text Style Denotes:
xxxxxxxx
Typed command
Encryption key, domain name or other information
<xxxxxxxx>
specific to your system that needs to be entered
(xxxxxxxx)
Comment about a command or set of commands
xxxxxxxx
Prompt, system response or other displayed information
Via console
1. Using a standard RS-232 cable, connect the Aruba mobility
controller to the serial port of a terminal or PC.
2. Run a terminal emulation program (such as HyperTerminal™) or
use a VT-100 terminal with the following configuration:
Bits per second:
Data bits:
Parity:
Stop bits:
Flow control:
3. Press Enter to display the Aruba mobility controller login screen.
4. Enter the default login:
These are case sensitive.
5. Enter and the default password:
enable
command mode.
9600
8
None
1
None
and the default password:
admin
Configuration Guide
admin
to get into the
admin
PN: 1725-36080-001_J.doc
.