Aruba A200 Configuration Manual page 3

Introduction
Certified Product Summary
Manufacturer:
Approved products:
RF technology:
Radio:
Security:
AP firmware version certified:
SpectraLink handset models certified: **
SpectraLink handset software certified:
SpectraLink radio mode:
Maximum telephone calls tested per AP:
Network topology:
†
Denotes products directly used in VIEW Certification testing.
* Maximum calls tested during VIEW Certification and the recommended setting in the SpectraLink 8000 SVP
Server. The certified product may actually support a higher number of calls for 802.11a and 802.11g radio modes.
** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified with the
WLAN hardware and software identified in the table. Throughout the remainder of this document they will be
referred to collectively as "SpectraLink Wireless Telephones".
Customer Service
PN: 1725-36080-001_J.doc
Polycom's Voice Interoperability for Enterprise Wireless (VIEW)
Certification Program is designed to ensure interoperability and high
performance between SpectraLink Wireless Telephones and WLAN
infrastructure products. The products listed below have been
thoroughly tested in Polycom's lab and have passed VIEW
Certification. This document details how to configure the Aruba
mobility controller with SpectraLink Wireless Telephones.
Aruba Networks
Controllers
A200
A800
A2400
A6000
802.11b/g/a
2.4 GHz (802.11 b/g), 5 GHz (802.11a)
WPA2-PSK
2.5.4.0
e340/h340/i640
89.134
802.11b
Switched Ethernet (recommended)
If you encounter difficulties or have questions regarding the
configuration process, please contact Aruba Networks technical
support at 1-800-943-4526, visit
e-mail support@arubanetworks.com.
Aruba Mobility Controllers: A200, A800, A2400, A6000
http://www.arubanetworks.com
†
122.010 or greater
802.11b
12
www.arubanetworks.com/support
Access Points
AP41
AP60
AP61
AP65
†
AP70
8020/8030
802.11g 802.11a
*
12
or
3