Connecting Aps - Aruba A200 Configuration Manual

Connecting APs

PN: 1725-36080-001_J.doc
Provisioning APs
The APs need to be provisioned. The Aruba APs can be provisioned
manually or be configured for automatic provisioning. For manual
provisioning, use the Web-based AP provisioning Web page. Refer to
the AP Provisioning User Guide for instructions on provisioning the
AP.
The APs can communicate with the controller over a L2 or L3
network. The only requirement is that each AP be assigned an IP
address and default gateway using DHCP.
Aruba Mobility Controllers: A200, A800, A2400, A6000
11