Aruba A200 Configuration Manual page 16

CLI Commands
802.11b/g Tx rates (if
all wireless client are
802.11g)
802.11a rates
802.11a Tx rates
ESSID
Short preamble
16
Required Settings
These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to
support data rates.
These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to
support data rates.
These rates should be
determined from RF site
survey. Verify you have
sufficient coverage to
support data rates.
<voice ssid as configured>
Tested: Enable
Recommended: Disable
Default Description
Settings
1,2,5,11
6,9,12,24
6,9,12,18,24, The supported Tx rates for
36,48,54 802.11a.
Aruba This is the ESSID that the voice
devices would associate with.
Enable Set the short preamble to
disable, to enable long-
preamble-only support.
Configuration Guide
PN: 1725-36080-001_J.doc