Connect Cables and Stand
AC Power connection (Optional)
Use if Power over Ethernet
(PoE) is unavailable
Features
Hookswitch
Reversible tab
(For wallmount
installation)
LCD Display
Soft key
Menu key
Speaker
System Requirements
The following are the minimum software and hardware requirements:
• Ethernet connection
• Access to AC power or Power Over Ethernet (PoE)
• Network access to Microsoft® Lync™ Server 2010 or greater
Setup
Connect the Ethernet cable as shown above. Connect the AC power
supply as shown above, if not powered via the Ethernet cable.
Follow the instructions provided on the LCD display to sign in,
configure and use the phone.
For more information, go to http://www.polycom.com/support/cx500, or
contact your system administrator.
NOTE: To ensure adequate support, the stand must be
fully inserted into the slot on the back of the phone.
In-Call Indicator
Keypad
Volume Up/Down
Back key
Navigation keys
(Up, Down, Select)
Home key
Soft key
Speaker key
(Listen only; no microphone)
Mute key
Security Lock
Handset cord jack
Left Side View