Backside; Installation - DAPAudio MA-8120PM Manual

MA-8120PM Paging Microphone
LED indicators
 CLIP: The indicator lights up when the signal's output level is too high. Reduce the volume for
undistorted performance.
 SIGNAL: The indicator lights up when communication data is available.
 POWER: Power indicator
ALL button
Press the button to select/deselect all 4 zones.
Zone buttons 1-4
Press the buttons to select/deselect the desired zones (1-4).
CHIME button
Press the button to play the chime tone for the selected zones.
TALK button
Press and hold down the button and speak to the microphone, in order to make announcements
for the selected zones.

Backside

LOCK/UNLOCK switch
When the switch is in LOCK position, it is not possible to select/deselect the zones.
RJ45 connector IN
Connect the MA-8120PM to the MA-8120 Digital Zone Amplifier by means of a CAT-5 cable.
Output level control
Turn the control to adjust the output level.

Installation

Remove all packing materials from the MA-8120PM Paging Microphone. Check if all foam and plastic
padding is removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Ordercode: D6197
6
Fig. 02