Page 2
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio EM-193 brings excitement to any venue. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly.
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
Do not switch the system on and off in short intervals, as this would reduce the system’s life. Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output. Only use device indoor, avoid contact with water or other liquids.
Description of the device Features The EM-193 is a professional wireless microphone from Dap Audio. There are two types ranges available: D145173, frequency range 740 – 764 Mhz D145182, frequency range 822 – 846 Mhz • PLL synthesized 16 switchable frequencies.
Set Up and Operation Before turning the EM-193 on, always make sure that the frequency matches your country. Placing the batteries ) Unscrew the grill of the microphone counter clockwise and take the plastic cover off from the back. 2) Once you have removed the grill. You see a small lip, which you have to push. 3) Pull out the battery holder.
Page 8
Changing the frequency of the transmitter 1) Press and hold the set(1) button for 3 seconds. The display shows FREQUE. After a second, the display shows the actual frequency while the MHz symbol blinks. 2) Use the up(3) and down(2) buttons to select the desired frequency. 3) Press the set(1) button again to store the setting.
Tips for achieving maximum performance. Make sure you can always see a receiver antenna from the transmitter position. Keep the distance from transmitter to receiver antenna as short as possible. Point the receiver antennas away from each other at 45 degrees angle from vertical position. ...
OF CONFORMITY This certifies that the following designated product: Name: EM-193 Wireless PLL 740-764MHz Handheld microphone 193 Freq Model No.: D145173 Brand Name: DAP AUDIO (Product Identification) Authorized by the European Union to act as Conformity Assessment Body in accordance with the R&TTE Directive 1999/5/EC EN 300 422-2 V1.2.2(2008-03)
Page 11
Declaration OF CONFORMITY This certifies that the following designated product: Name: EM-193 Wireless PLL 822-846MHz Handheld microphone 193 Freq Model No.: D145182 Brand Name: DAP AUDIO (Product Identification) Authorized by the European Union to act as Conformity Assessment Body in accordance with the R&TTE Directive 1999/5/EC EN 300 422-2 V1.2.2(2008-03) EN 301 489-1 V1.8.1(2008-04) EN 301 489-9 V1.4.1(2007-11)
Maintenance The DAP Audio EM-193 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean.
Need help?
Do you have a question about the D145173 and is the answer not in the manual?
Questions and answers