Subscribe to Our Youtube Channel
Related Manuals for DAPAudio CM-95
Summary of Contents for DAPAudio CM-95
- Page 1 CM-95 ORDERCODE D1355 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands...
- Page 2 Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio CM-95 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products.
- Page 3 DAP Audio DAP Audio CM-95 Product Guide ™ Warning ................................... 3 Safety Instructions ..............................3 Operating Determinations ............................4 Return Procedure ..............................4 Claims ..................................4 Description of the device ............................. 5 Features ..................................5 Overview ..................................5 The microphone ................................ 6 Set Up and Operation ..............................
-
Page 4: Unpacking Instructions
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Your shipment includes: • DAP CM-95 • Protection bag • User Manual CAUTION! -
Page 5: Operating Determinations
If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Dap Audio dealer for service. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. -
Page 6: Description Of The Device
Description of the device The Dap Audio CM-95 is a Kick Drum / High SPL Bass Section boundary microphone. Features • Cardioid directivity • High SPL ability • Powerful low frequency band, no coloration • Built-in preamplifier • Fixed 1.5-meter cable... -
Page 7: Set Up And Operation
For the best results, we suggest using the CM-95 in combination with our DM-55 (D1357). Carefully cut the lows on the CM-95 channel of your mixer and cut highs on the DM-55 channel of your mixer to get the best results. See setup example 2. -
Page 8: Connection Cables
Setup example 2: Advanced setup. Make sure to place the CM-95 on a cushion, piece of isolation material or other soft material to avoid contact noise. Place the DM-55 in front of the hole in the drumhead. Aim the microphone at the place where the beater hits the rear drumhead. -
Page 9: Maintenance
Compensation of interference with balanced connections Maintenance The DAP Audio CM-95 requires almost no maintenance. However, you should keep the unit clean. Disconnect the microphone and then wipe the cover with a damp cloth. Do not immerse in liquid. Do... -
Page 10: Product Specifications
Product Specifications Type: Back electret, Ø14 mm Polar pattern: Cardioid Frequency response: 30-18.000 Hz Sensitivity: -60 dBV/Pa (1 mV) Output impedance: 600 Ω Min. load impedance: 2000 Ω S/N Ratio: 70 dB Equivalent output noise: 24 dB Max. SPL: 149 dB SPL Dynamic range: 125 dB Power requirements:...
Need help?
Do you have a question about the CM-95 and is the answer not in the manual?
Questions and answers