Table of Contents
Advertisement
MA-8120PM Paging Microphone
Maintenance
The DAP Audio MA-8120PM Paging Microphone requires almost no maintenance. However, you should
keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth.
Do not immerse in liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
DAP Audio MA-8120PM Paging Microphone
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
01) If the device does not operate properly, unplug the device.
02) Check power from the wall, all cables, connections, etc.
03) If all of the above appears to be O.K., plug the unit in again.
04) If nothing happens after 30 seconds, unplug the device.
05) Return the device to your DAP Audio dealer.
Product Specifications
Model:
Dimensions:
Weight:
Operating and Programming:
Signal link:
Electro-mechanical effects:
Rated output level:
Input sensitivity:
Frequency response:
T.H.D.:
Zones:
Max. ambient temperature t
Max. housing temperature t
Design and product specifications are subject to change without prior notice.
Ordercode: D6197
DAP Audio MA-8120PM Paging Microphone
203 x 139 x 470 mm (LxWxH)
0,9 kg
RJ45 IN
0dB / 600Ohm, balanced
-60dB / 600Ohm, balanced
45Hz – 15kHz
< 0,1%
4
:
40°C
a
:
80°C
B
Website:
www.Dap-audio.info
Email:
service@highlite.nl
10
Advertisement
Table of Contents
