Sound/Setup Program/Bank - Kawai MP11SE Owner's Manual

MIDI Implementation
4

SOUND/SETUP Program/Bank

If the Receive Mode MIDI parameter is set to Panel (page 104), the MP11SE receives MIDI data on the System
Channel only. To change internal sounds via MIDI, please refer to the SOUND Program Number list below.
* Note: If the MP11SE receives the Program Number from 1 to 128 and Bank number MSB 0 or 1 in the System Channel, the MP11SE will switch to SETUP mode
and the corresponding SETUP is recalled. When the Receive Mode is Section, the MP11SE can be received to each internal sound sections individually.
Panel Mode:
SETUP Program Number
BANK#MSB
BANK#LSB
PROGRAM
SOUND Program Number
BANK#MSB
BANK#LSB
PROGRAM
* Only one sound section is activated.
Section Mode:
BANK#MSB
BANK#LSB
PROGRAM
*For each section's Receive Channel.
*Not related to Setup ON/OFF.
144
1: SETUP mode ON
0-25: BANK A-Z
1-8: Setup Variation 1-8
0: SETUP mode OFF
0: PIANO Section
1: E.PIANO Section
2: SUB Section
1-12: PIANO/E.PIANO Section's Sound variation 1-12
1-16: SUB Section's Sound variation 1-16
(ignored)
(ignored)
1-12: PIANO/E.PIANO Section's Sound variation 1-12
1-16: SUB Section's Sound variation 1-16