Kawai MP11SE Owner's Manual page 80

Audio Record/Playback
 Moving the playback position (seek)
Press the  or  recorder control buttons to rewind or fast-
forward the playing position of the audio file .
* The playback position can be moved both before and during playback.
6. Stopping audio file playback
While an audio file is playing:
Press the / recorder control button.
The LED indicator for the / button will turn OFF, and audio
file playback will stop.
Press the / button again to continue playback from the
stopped position, or the   button to reset the playback
position to the beginning of the audio file.
* The F4 function button (STOP) can also be used to reset audio playback.
 A-B Repeat function
The A-B Repeat function allows one section of an audio file to be
repeated continuously (looped). This function can be activated
both before and during audio file playback.
Press the A  B recorder control button once to set the start
point of the loop.
The LED indicator for the A  B button will start to flash.
Press the A  B button again to set the end point of the loop.
The LED indicator for the A  B button will turn ON and the
specified section will repeat continuously.
Press the A  B button once again to cancel the loop.
The LED indicator for the A  B button will turn OFF and normal
playback will resume.
 Chain Play mode
Chain Play mode allows all audio files stored in a folder to be played continuously, in sequence.
Press and hold the / recorder control button.
The Chain Play icon will be shown in the LCD display, and the
audio files will start to play continuously, in sequence.
80
(USB Memory)
Chain Play
activated
 button:  button:
Rewind Fast-Forward
LED indicator OFF:
Playback has stopped
  button:
Reset position
LED indicator flashing:
Start point of the loop set
LED indicator ON:
End point of the loop set, loop activated
LED indicator OFF:
Loop deactivated, normal playback resumes
LED indicator ON:
Playback is in progress
/ button:
Resume playback