Kawai MP11SE Owner's Manual page 29

 Virtual Technician parameters
Page Knob Parameter
A Voicing
B String Resonance
1
C Undamped Res.
D Damper Resonance
A Key-off Effect
B Damper Noise
2
C Hammer Delay
D Fall-back Noise
A Topboard
3 B Stereo Width
C Brilliance
* Voicing types: Normal, Mellow1, Mellow2, Dynamic, Bright1, Bright2, User1~5
Topboard types: Close, Open1, Open2, Open3
* For more detailed information about the PIANO section's Virtual Technician parameters, please refer to page 50.
 Adjusting Virtual Technician parameters
After entering the Virtual Technician parameters page:
Press the CURSOR buttons to move the selection cursor, and
through the EDIT menu pages.
* The F1 and F4 buttons can also be used to scroll through the different EDIT
menu pages.
Press the +/YES or -/NO buttons to increase or decrease values.
Alternatively, turn the control knobs (A, B, C, D) to adjust the
parameter assigned to that knob.
Press the EXIT button to return to the main EDIT menu.
Description
Adjusts the tonal character of the selected piano sound.
Adjusts the resonance that is heard when notes are held.
Adjusts the resonance produced by the topmost undamped strings.
Adjusts the resonance that is heard when pressing the damper pedal.
Adjusts the sound that is heard when keys are released.
Adjusts the sound that is heard when pressing the damper pedal.
Adjusts the delay of the hammer striking strings when playing pianissimo.
Adjusts the sound that is heard when the key action falls back.
Adjusts the position of the grand piano topboard.
Adjust the stereo width of the selected piano sound.
Adjusts the brightness of the overall piano sound.
Page 1/3
Page 2/3
Page 3/3
Value range
[see below]
OFF, 1 ~ 10
OFF, 1 ~ 10
OFF, 1 ~ 10
OFF, 1 ~ 10
OFF, 1 ~ 10
OFF, 1 ~ 10
OFF, 1 ~ 10
[see below]
0 ~ 127
–10 dB ~ +10 dB
or
29