Transpose - Kawai MP11SE Owner's Manual

Global Section
2

Transpose

The Transpose function allows the pitch of the MP11SE's keyboard to be raised or lowered in semi-tone steps. This
is particularly useful when accompanying instruments tuned for different keys, or when a song learned in one key
must be played in another key.
 Turning Transpose ON or OFF
Press the TRANSPOSE button to turn the transpose function ON
or OFF.
The LED indicator for the TRANSPOSE button will turn ON or
OFF to indicate the current status of the transpose function.
* The previous transpose setting will be remembered after the transpose
function is turned OFF, allowing rapid adjustment of the keyboard pitch.
 Checking the Transpose setting
Press and hold the TRANSPOSE button.
The current transpose setting will pop-up in the LCD display.
* The default value, 0, indicates no transposition.
 Setting the Transpose value: Method 1
Press and hold the TRANSPOSE button, then press the +/YES
or –/NO buttons to increase or decrease the transpose value in
semi-tone steps.
* The TRANSPOSE value can be adjusted within the range of -24 ~ +24.
The LED indicator for the TRANSPOSE button will turn ON
automatically to indicate that transpose is activated.
* To reset the transpose value to 0 (no transposition), press both the –/NO
and +/YES buttons simultaneously.
* The transpose value will be stored to SYSTEM memory automatically,
however the transpose ON/OFF state will not be stored.
34
LED indicator ON:
Transpose is turned ON
Decrease/Increase values
Example: To raise the keyboard pitch by 4 semi-tones,
press and hold the TRANSPOSE button, then press the
+/YES button four times.