Loading An Smf File Into Memory - Kawai MP11SE Owner's Manual

Song Recorder
(Internal Memory)
5. Saving the song
Press the F4 function button (EXEC).
The Save SMF confirmation screen will be shown in the LCD
display.
Press the F2 button (YES) to confirm the Save SMF operation, or
the F3 button (NO) to return to the previous screen.
* The +/YES and –/NO buttons can also be used to confirm or cancel the
save operation.
* To prevent data loss, avoid turning the power OFF while the MP11SE is
saving files to USB memory.
4

Loading an SMF file into memory

This function can be used to load SMF files into an empty recorder song memory.
 Preparing the USB memory device
Prepare a selection of SMF MIDI files, copying the data to a USB
memory device.
1. Selecting an empty song memory
After turning Recorder mode ON:
Turn control knob C to select an empty song memory.
2. Connecting a USB memory device
Connect a USB memory device to the USB to Device port.
* USB devices should be formatted to use the 'FAT' or 'FAT32' filesystems.
The USB device will be scanned, and the LOAD function will
appear at the bottom of the LCD display.
* The LOAD function will appear only when the selected song memory is
empty. For information about erasing song memories, please refer to
page 73.
70
Load
function
F2 button: F3 button:
YES: Confirm NO: Cancel
Song
memory