Kawai MP11SE Owner's Manual page 46

EDIT Menu parameters
5
Key Setup
3. Key Volume
This parameter selects the Key Volume setting for the selected
sound section, if desired.
Key Volume Description
An evenly balanced volume throughout the
Normal (default)
keyboard.
Gradually reduces the volume of the keyboard
High Damping
towards the treble region.
Gradually reduces the volume of the keyboard
Low Damping
towards the bass region.
High & Low Gradually reduces the volume of the keyboard
Damping in both the treble and bass regions.
Gradually reduces the volume of the keyboard
Center Damping
in the central region.
A custom keyboard volume, allowing the
User
volume of each key to be individually adjusted.
* For information about creating User Key Volumes, please refer to the User
Edit explanation in the SYSTEM menu chapter (page 108).
7. Key Scaling Damping
This parameter determines whether or not damping (velocity
reduction) should be applied to a sound over a specific range.
This parameter may be useful when layering a piano sound with a strings
sound, in order to reduce the level of the strings in the higher key range.
9. Key Range Type
This parameter selects the Key Range type for the selected
section.
Type Description
Off The sound is used for all 88 keys of the keyboard.
Upper The sound is used for the upper split.
Lower The sound is used for the lower split.
Zone The sound is used for a defined zone between two keys.
* This parameter is not stored to SOUND but to SETUP only.
11. Key Range Zone Lo
This parameter defines the bottom key of the key range zone.
* For more information about Key Range functions, please refer to page 26.
* This parameter is not stored to SOUND but to SETUP only.
46
(PIANO, E.PIANO, SUB)
(cont.)
5 + 5
types
o
o , u , l
ff pper ower
: a0 ~ c8
range
4. Minimum Touch
user
This parameter adjusts the minimum key velocity required to
produce a sound.
5. Octave Shift
This parameter adjusts the amount of octave transposition for
the selected sound.
* This parameter is not stored to SOUND but to SETUP only.
6. Zone Transpose
This parameter adjusts the amount of transposition for the
selected sound.
* This parameter is not stored to SOUND but to SETUP only.
8. Key Scaling Key
, o
n ff
This parameter defines the point on the keyboard from which
Key Scaling Damping should be applied, up to the highest key.
10. Split Point
, z
one
This parameter defines the point on the keyboard at which the
upper and lower parts are divided.
* For more information about Key Range functions, please refer to page
26.
* This parameter is common for all three sound sections and all MIDI zones.
* This parameter is not stored to SOUND but to SETUP only.
12. Key Range Zone Hi
This parameter defines the top key of the key range zone.
* For more information about Key Range functions, please refer to page 26.
* This parameter is not stored to SOUND but to SETUP only.
: 1 ~ 20
value
: –3 ~ +3
value octaves
: –12 ~ +12
value
: a0 ~ c8
range
: a0 ~ c8
range
: a0 ~ c8
range