General Safety Information - ABB SCC-C Operator's Manual

General Safety Information

Requirements for
Safe Operation
Personnel
Qualifications
Special Information
and Precautions
National Regulations
Instrument Safety
and Safe Operation
Additional
Information
4
In order to operate in a safe and efficient manner the instrument should be properly
handled and stored, correctly installed and started, properly operated and correctly
maintained.
Only persons familiar with the installation, set-up, operation and maintenance of
comparable equipment and certified as being capable of such work should work
on the instrument.
These include
• The content of this operator's manual.
• The safety information affixed to the instrument.
• The applicable safety precautions for installing and operating electrical devices
• Safety precautions for working with gases, acids, condensates, etc.
The regulations, standards and guidelines cited in this operator's manual are
applicable in the Federal Republic of Germany. The applicable national regulations
should be followed when the instrument is used in other countries.
The instrument is designed and tested in accordance with EN 61010 Part 1,
"Safety Provisions for Electrical Measuring, Control, Regulation and Laboratory
Instruments" and has been shipped ready for safe operation.
To maintain this condition and to assure safe operation, read and follow the safety
information identified with the
persons at risk and can lead to instrument damage as well as damage to other
systems and instruments.
If the information in this operator's manual does not cover a particular situation,
ABB Service is prepared to supply additional information as needed.
Contact your local ABB Service representative or
ABB Service, Telephone: +49-18 05-12 35 80, Telefax: +49-6 21-3 81-51 35
E-mail: callcenter.deapr@de.abb.com
SCC-C Sample Gas Cooler Operator's Manual
symbol in this manual. Failure to do so can put
42/23-55 EN Rev. 1