Table of Contents
Advertisement
11.7
Application "General functions"
Up to five channels can be activated for the use of the applications described in this section.
11.7.1
Channel x - Application
Options:
Inactive:
■
–
The application is not active. No parameters are available.
Cyclic telegrams:
■
–
After the receipt of a telegram on object "GFx: input", a telegram with the same content
is sent cyclic via object "GFx: output". Additional information, See "Application - Cyclic
telegrams" on page 147.
Priority:
■
–
The telegrams received via communication object "GFx: switch input" are transferred to
object "GFx: output" depending on the state of the "GFx: input priority" object. Additional
information, See "Application - Priority" on page 152.
Logic gate:
■
–
The application is used to specify the logic gate the communication objects "GFx: input
1","GFx: input 2" and "GFx: output" are to be linked with. Additional information, See
"Application - Logic gate" on page 153.
Gate:
■
–
The application can be used to filter certain signals and to block the flow of signals
temporarily. Additional information, See "Application - Gate" on page 159.
Staircase lighting:
■
–
The application can be used to supply switching telegrams or value telegrams with a
switch-off delay. Additional information, See "Application - Staircase lighting" on page
165.
Delay:
■
–
Telegrams can be received via the "GFx: input" object with the application. Additional
information, See "Application - Delay" on page 169.
Product manual 2CKA001473B9488
Description of application and parameters
Inactive
Cyclic telegrams
Priority
Logic gate
Gate
Staircase lighting
Delay
Min/max value transducer
Light scene actuator
Application "General functions"
│145
Advertisement
Table of Contents
