Installation - Becker BT45-BKR Quick Install Manual

Introduction: Introduction:
Introduction: Introduction:
Safety comes first when you're on the road, so having an intuitive
and easy to use Bluetooth kit is essential to reducing driver
distraction. The new BT45-BKR kit is compatible with virtually all
Bluetooth phones, and sounds great whether using it for mobile
conversations or streaming music. The wireless remote control
button conveniently installed on the dash is used to launch Voice
Recognition application (Siri, Google Now, Assistant etc.) to initiate
phone calls and launch applications. Thanks to the BT45-BKR Kit
you can keep the radio and car you love keep the radio and car you love while enjoying Bluetooth keep the radio and car you love keep the radio and car you love
features only available on newer cars.

Installation:

Installation: Installation: Installation:
Warning! Warning! Although not critical, we recommend disconnecting the car Warning! Warning!
battery. Keep in mind that most Becker radios are coded and will not
operate without the code. Radio code must be available for radio to operate
upon reconnection.
Remove radio from the dashboard to gain access to the
connectors. Special removal tools (See Fig. 1
remove the Becker radio.
Radio removal Tools
Fig. 1 Fig. 1) are required to Fig. 1
Fig. 1 Fig. 1 Fig. 1 Fig. 1
1. To remove radio, slide tools into slots to detent position.
Withdraw the radio by pulling outwards. See Fig. 2
2. Disconnect the blue, green and yellow plugs (C C C C - - - - 1 1 1 1 , C C C C - - - - 2 and
C C C C - - - - 3 3 3 3 ) from radio as seen in Fig.
Note! ! ! ! These slots are empty if there is no Changer/amplifier installed. If Note
Note Note
vehicle has CD Changer, both the CD Changer, both the b b b b lue and green
CD Changer, both the CD Changer, both the
disconnected. If vehicle has amplifier, the yellow plug must remain disconnected. If vehicle has amplifier, the yellow plug must remain
disconnected. disconnected. If vehicle has amplifier, the yellow plug must remain If vehicle has amplifier, the yellow plug must remain
connected to C1. connected to C1
connected to C1 connected to C1
Radio Connectors
Fig. 2 Fig. 2 Fig. 2
Fig. 2 Fig. 2 Fig. 2 Fig. 2
2 and 2 and 2 and
Fig. Fig. 3 3 3 3 Fig.
lue and green plugs must be plugs must be
lue and green lue and green plugs must be plugs must be
Fig. Fig. 3 3 3 3 Fig. Fig.