Becker A2D-BKR Quick Start Installation Manual

Audio streaming for radios with aux menu option, bluetooth

Advertisement

Quick Links

Courtesy of:DiscountCarStereo.com
A2D-BKR
Quick Start Audio Streaming Installation Guide
for Becker Radios with AUX Menu Option
Created October 1, 2015
Revised: May 23, 2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A2D-BKR and is the answer not in the manual?

Questions and answers

Summary of Contents for Becker A2D-BKR

  • Page 1 Courtesy of:DiscountCarStereo.com A2D-BKR Quick Start Audio Streaming Installation Guide for Becker Radios with AUX Menu Option Created October 1, 2015 Revised: May 23, 2019...
  • Page 2 Most Phones with Bluetooth 2.x, 3.0 and 4.0 include the A2DP profile so please check your phone to verify compatibility. Remember the A2D-BKR works only on Becker Radios with an “AUX” Menu Option and replaces the CD Changer (if present) however; to retain use of the CD Changer, purchase our Fig. 2 A2D-BKRCD instead.
  • Page 3 Optional T-harness is required to retain cluster display (see Fig. 4a) and/or Warning! Most Becker radios are coded and will not operate without the code. factory hands-free calling option. Do not proceed to step 4 if radio code is not available otherwise radio will not To install: operate upon reconnection.
  • Page 4 To resolve this, you must purchase conversion harness below: (BHA1784_iso) Turn radio "ON" 2. Press and hold the "TP" button for about 8 seconds until Becker 1 is displayed. 3. Turn the Tuning Knob until AUX OFF is displayed.
  • Page 5 Turn radio ON. Press the soft-key labeled “Aux” until the screen displays “AUX Mode Press and hold the ☼ button for 8 seconds, until Becker 1 is displayed. on”. Turn the Tuning Knob until AUX OFF is displayed.
  • Page 6 2. On A2DP device: go to Settings Bluetooth 3. Select and turn on, select Bluetooth settings Becker DTM /High speed (i.e. BE-7892, BE7910) Scan for devices 4. Tap Once Wait for the Bluetooth device name to appear and select it.
  • Page 7: Optional Remote Control

    Test Operation: Turn ignition and Radio “ON” (May Porsche radios turn ON without key in ignition; however, for this Bluetooth adapter to power up ignition must be turned “ON”) 2. Press CD or button combination to enter AUX Mode. 3. Launch Smartphone or tablet streaming application 4.
  • Page 8 - Connect black wire from module to black wire from filter (out) - Connect like wire colors from installation harness to filter (in) Frequent asked questions My vehicle has a CD Changer. Does the A2D-BKR work in vehicles with CD Changer? Fig. 7 YES;...

Table of Contents