Subscribe to Our Youtube Channel
Related Manuals for Becker A2DIY-BKR
Summary of Contents for Becker A2DIY-BKR
- Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 A2DIY-BKR (newest version) QUICK START BLUETOOTH INSTALLATION GUIDE FOR BECKER AUX READY RADIOS...
-
Page 2: Installation
Many European vehicle owners wanting to keep their cars as original possible Slide tools into slots on radio. (Straight edge facing away). Withdraw (including Becker radio) will be pleased to find this DIY kit. Our A2DIY-BKR radio by pulling outwards. To release keys simply press retaining module allows these proud owners to link up their Smartphones for Bluetooth springs. - Page 3 Disconnect blue, green plug and yellow plug (if present) from radio Warning: In order to retain Ferrari cluster display; (See Fig. 4a) optional ISO8- harness (See Fig. 4b) is required and must be purchased alongside this (See Fig. 3) by pressing release tabs on yellow and blue plugs. module.
- Page 4 9. Route microphones down side pillar, under dash and into radio cavity. 10. Connect microphone plug to module “MIC” jack (See Fig. 9) 11. Ensure microphone plug is fully inserted. Fig. 5 Fig. 9 harness 7. Connect supplied 3.5mm cable (See Fig. 6) to Module “AUX” jack (See Fig.
- Page 5 Optional charging kit Purchase optional USB “Fast charge” kit to charge devices while on the road. Should you decide to add it, we suggest 2 mounting options: A. Flush to dash/panel requires drilling a ¾” hole in the dash B. Flush with Support bracket (use this option to mount USB terminal Fig.
-
Page 6: Media Button
USB Bracket (No drilling) Media button Pairing Bluetooth media button: Ensure Bluetooth is enabled on your Locate flat surface at location of choice within 3.2 ft. of radio and device (e.g., Smartphone/Tablet etc.) mount USB support bracket (See Fig. 15) to surface using Press and hold pause/play button (See Fig. -
Page 7: Bluetooth Pairing
Operation: Bluetooth pairing Once paired with smartphone/Tablet, users may perform the following functions Pairing varies among devices but basic steps are the same. This process is done on iOS devices with Bluetooth 3.0 and later or Android 4.0 or later. upon initial install and will not have to be repeated. - Page 8 Turn Radio back “ON” Press “CD” button to enter AUX Mode Radios with 3 Function buttons (i.e. BE4527) Turn radio "ON" 2. Press and hold the "TP" button for about 8 seconds until Becker 1 is displayed. 3. Turn the Tuning Knob until AUX OFF is displayed.
- Page 9 Turn the rotary control/push (OK) button counterclockwise until System Settings appears at the top right of the display Becker 4775 (Land Rover Traffic Pro) Press the rotary control/push (OK) button Turn the rotary control /push (OK) button to select External Device Confirm selection by pressing the rotary control/push (OK) button Select “AUX”...
-
Page 10: Operation
9. If correct operation is confirmed go ahead and reinstall radio. Warning: Playlist and Track selection is *NOT* possible using Becker radio button. Use audio device built-in controls and display or media button to access and control audio files and applications. -
Page 11: Comparison Chart
Ensure ignition key is in ACC or ON positions. This ensure module is powered and ready to pair. Disclaimer • This product has no affiliation with Porsche, BMW, Mercedes, Maserati, Landrover, Becker etc. • We’re not liable for misuse of this product. •We recommend professional installation.
Need help?
Do you have a question about the A2DIY-BKR and is the answer not in the manual?
Questions and answers