Installation - Becker BT-BKRMT Installation Manual

Introduction: Introduction:
Introduction: Introduction:
Motorola Bluetooth kits include a Universal installation harness, and
because of that it will not fit Becker radios which means you are
required to cut and splice the radio harness. The BT-BKRMT
installation harness is designed exclusively for the installation of
Motorola IHF1700, IHF1000 and T605 Bluetooth Car Kits to any
Becker Radio with a "PHONE" menu option. With the BT-BKRMT
harness, installation time is reduced to minutes and guarantees peace
of mind knowing that every connection is safe and secure.

Installation:

Installation:
Installation: Installation:
Warning! Warning! Although not critical, we recommend disconnecting the car Warning! Warning!
battery. Keep in mind that most Becker radios are coded and will not
operate without the code. Radio code must be available for radio to operate
upon reconnection.
1. Remove radio from the dashboard to gain access to the
connectors.
2. Special removal tools (available separately) are required to
remove the Becker radio. (See Fig
Radio removal Tools
Fig. . . . 1 1 1 1 )
Fig Fig
Fig. 1 1 1 1 Fig.
Fig. Fig.
3. To remove radio, slide both tools into the slots to the second
detent position. Withdraw the radio by pulling outwards.
4. With radio removed , proceed to step 5
Note: Vehicles with CD Changer, iPod adapter etc. please
proceed to step 8
Becker Radio Connectors
5. Insert the pin on green or white wire into slot # 13 on the
blue plug (included in kit) (See Fig. 3
6. Insert the pin on purple wire into slot #14 on the blue plug
(included in kit) (See Fig. Fig. 3 3 3 3 ). Fig. Fig.
Fig. 3 Fig. 3 Fig. 3 Fig. 3
ISO plug
Fig. 2 2 2 2 Fig. Fig. Fig.
Fig. 3) Fig. 3 Fig. 3