Cleaning The Isleep 20+ And Replacing The Filters; Cleaning The Isleep 20 - Breas iSleep 20+ User Manual

9 Cleaning the iSleep 20+ and Replacing the Fil-
ters
The patient-connected parts and the filter must be cleaned and replaced regu-
larly to ensure correct function of the iSleep 20+. All replaced parts must be dis-
posed of in accordance with local environmental regulations regarding the
disposal of used equipment and waste.

9.1 Cleaning the iSleep 20+

To avoid electrical shock, disconnect the mains supply to the iSleep 20+
before cleaning. Do not immerse the iSleep 20+ into any fluids.
• Always be careful when cleaning to ensure that you do not damage any
• Fluid must not be allowed to enter into the iSleep 20+.
Main Unit
Switch off the iSleep 20+ and dis-
1
connect the mains supply.
Remove the patient circuit.
2

36 Cleaning the iSleep 20+ and Replacing the Filters

iSleep 20+ users manual
equipment.
Doc. 004270 En-Eu T-3b