Breas iSleep 20+ User Manual page 35

Cpap system
Hide thumbs Also See for iSleep 20+:
Table of Contents

Advertisement

I
TEM
Action
Indication
Reset
Doc. 004270 En-Eu T-3b
D
ESCRIPTION
The leakage has been too high during the night
for an accumulated time longer than 30 minutes.
Check the mask fitting.
133: Low humidifier temperature. Check that the
humidifier is connected correctly (this error is
shown after the treatment session). If the error
remains, contact your care provider.
134: High humidifier temperature. Turn off the
iSleep 20+. Disconnect the humidifier and recon-
nect it. If the error remains, contact your care pro-
vider.
The iSleep 20+ will continue or stop the treat-
ment depending on the type and priority of the
event.
The indication is asserted audible with a tone and
visible by a display message.
If possible, correct the error cause and disconnect
and connect the mains power source.
If the error remains, contact your care provider.
Indications
iSleep 20+ users manual
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents