Fargo DTC550 User Manual page 50

RESTRICTED USE ONLY
Reviewing the upgraded 81754 PVC Cards (continued)
Follow these two (2) instructions below:
1. Instruction for new 81754 PVC card stock: Increase the Printer Driver's Dye-Sub
Intensity to print with the new 81754 PVC card stock on Fargo Card Printers (S/N A319
and older). See the chart provided below. See the appropriate Fargo service documents
for specific Printer Driver instructions.
Card New Printer (S/N A320 and
newer)
New Card No Change Necessary
2. Instruction for existing 81754 PVC card stock: The Printer Driver's Dye-Sub Intensity
setting may or may not need to be decreased to print existing card stock. See the chart
provided below. See the appropriate Fargo service documents for specific Printer Driver
instructions.

Technician Note 1: To control the brightness of the image, adjust the Dye-Sub
Intensity slide on the Image Color tab of the Printer Driver.

Technician Note 2: Moving the Dye-Sub Intensity slide to the left causes less heat
to be used in the printing process, thus generating a lighter print.
Card New Printer (S/N A320 and
newer)
Old Card Decrease the Dye-Sub Intensity
as follows:
DTC550:
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 1.0)
Old Printer (S/N A319 and older)
No Change Necessary
5 - 10 %
Fargo Electronics, Inc.
Old Printer (S/N A319 and
older)
Increase the Dye-Sub Intensity as
follows:
DTC550: 5 - 10 %
2-33