Moscad-M Installation Kit For Gp140/Gp328/Ht750/Pro5150 Radios; Moscad-M Debug Hardware Kit; Moscad-M Board - Motorola MOSCAD-M Owner's Manual

MOSCAD-M Installation Kit for GP140/GP328/HT750/PRO5150 Radios

The MOSCAD-M Installation Kit for GP140/GP328/HT750/PRO5150 Radios enables users to
install a GP140, GP328, HT750 or PRO5150 radio (externally) to the MOSCAD-M. The
Installation Kit includes:
•
Mounting Bracket (FCN5516A)
•
Audio Communication Cable (FKN5953A)
•
Audio Accessory Adapter (HLN9716B)
•
DC Power Cable (FKN4465A)
•
BNC Adapter (HLN9756A)
•
DIN Rail Radio Connectors (Part #0786144U05)
See Figure 23 for connection details.
MOSCAD-M Debug Kit
The MOSCAD-M Debug kit enables the user to debug a 'C' application using the XRAY
debugger. Set up the MOSCAD-M Configurator PC as described below, then follow the
debugging instructions in the 'C' Toolkit for MOSCAD Family RTUs manual.

MOSCAD-M Board

The kit consists of a special MOSCAD-M board, specifically built for debugging. The system
software (system.krl) is burned into the flash memory at the factory. Another system file
(MmxyyD2.krl) is available with the Debug System Installation (FVN9779) MOSCAD-M
Configurator and must be downloaded before using the Microtec XRAY debugger.
The debug board has no plastic housing and all components are visible. Next to the push-
button there are two additional buttons which do not exist in the standard MOSCAD-M. The
leftmost button is Reset. The rightmost button is NMI (Non Masked Interrupt). The NMI (or
CTRL+C from the PC keyboard) will stop the program.
Two megabytes of RAM are installed in the debug board to enable downloading the system
software from the PC to the unit.
Appendix B: Models and Accessories
42