Io1 Page Led Functions - Motorola MOSCAD-M Owner's Manual

IO1 Page LED Functions

The following table describes the functions of the diagnostic LEDs when set to the IO1
(Page 1) toggle or display (IO1 LED on).
Name
CPU
IO1
IO2
IO3
LED 1
LED 2
LED 3
LED 4
LED 5
LED 6
LED 7
LED 8
LED 9
LED 10
LED 11
LED 12
LED 13
LED 14
LED 15
The LED is not updated after each change in DI status, but rather
after the user performs a scan. Thus, the status of the DI reflects
the status as of the last software scan.
On/Off Function/Indication
Off
Flashing: FPGA is not loaded correctly.
On Display is in IO1 page.
Off
Off
On DI1 is on.
On DI2 is on.
On DI3 is on.
On DI4 is on.
On DI5 is on.
On DI6 is on.
On DI7 is on.
On DI8 is on.
On DI9 is on.
On DI10 is on.
On DI11 is on. (Can be fast counter)
On DI12 is on. (Can be fast counter)
On DI13 is on. (Models with expansion board only)
On DI14 is on. (Models with expansion board only)
On DI15 is on. (Models with expansion board only)
16
The MOSCAD-M Unit