5H2
(3) Remove the drive unit and main PWB
1. Remove the four screws.
2. Pull the upper cover rear ends (1).
3. While pulling out the cassette size switch
(2), and then remove the upper cover.
4. Remove the two connectors.
5. Remove the three screws and then remove
the motor bracket (drive unit).
1-4-4
Screw
Figure 1-4-4
Screw
Screw
Connector
Figure 1-4-5
Screw
Upper cover
Screw
Cassette size
switch
Screw
Motor bracket
(Drive unit)
Connector
Screw