Install Remote Control Battery; Turn On; Set Clock - Philips CEM250 User Manual

4
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
Note
•
Skip this step if the unit is not fixed by sleeve but
supplied screws.
5
Remove the two screws on the top of the
unit.
14 EN
6
Place the supplied rubber cushion over the
end of the mounting bolt.
7
Slide the unit into the dashboard until you
hear a click sound.
8
Reconnect the negative terminal of the car
battery.

Install remote control battery

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For first-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
Close the battery compartment.

Turn on

1
Press to turn on the unit.
• To turn off the unit, press for 
seconds.

Set clock

1
Press MENU/DISP for  seconds.
2
Press or repeatedly until the currently
time is displayed.
3
Turn clockwise to set hour.
4
Turn anti-clockwise to set minute.
5
Press to confirm.
View clock
1
Press MENU/DISP repeatedly until the
clock is displayed.
EN 15