Install Remote Control Battery; Turn On; Select Display Language - Philips CED320/51 User Manual

8
Reconnect the negative terminal of the
car battery.

Install remote control battery

Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine or fi re. Never discard batteries
in fi re.
Note
•
Remove batteries if they are exhausted or if
the remote control is not to be used for a long
time.
•
Batteries contain chemical substances, they
should be disposed of properly.
•
Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
16 EN

Turn on

1
Press the knob to turn on the unit.
»
The unit plays the last listened
program: DVD, Tuner, USB or SD/MMC
Card (if there is USB device or SD/
MMC card connected).
• To turn off the unit, press the
more than 2 seconds.
• When the unit is idle for over 5 minutes,
it goes to standby mode and displays
screen saver.

Select display language

Russian is the default language for screen display.
You can change the display language.
1
Press MENU.
»
The main menu is displayed.
2
On the remote control, press the
navigation buttons to select [SETTINGS],
then press SEL to confi rm.
»
The setting menu is displayed.
3
Press the navigation buttons to select
[Language] > [OSD Language].
knob for