Additional Information; Detach The Front Panel; Replace Fuse; Remove The Unit - Philips CEM250 User Manual

9 Additional
information

Detach the front panel

You can detach the front panel to deter theft.
1
Press to release the panel.
2
Press the left side of the panel rightward.
3
Pull the panel towards you to detach it
from the chassis.
4
Store the panel in the supplied carry case
to protect it from dirt or damage.

Replace fuse

If the fuse is damaged,
1
Check the electric connection.
2
Buy a fuse that matches the voltage of the
damaged fuse.
3
Replace the fuse.
24 EN
A1 A2 A3 A4 A5 A6 A7 A8 A1 A2 A3 A4 A5 A6 A7 A8
B1 B2 B3 B4 B5 B6 B7 B8 B1 B2 B3 B4 B5 B6 B7 B8
FUSE 15A FUSE 15A
Note
•
If the new fuse gets damaged again, there may be an
internal malfunction. Consult your Philips dealer.

Remove the unit

You can remove the unit from the dashboard.
1
Detach the front panel.
2
Pull out the unit by using the removal keys.
Connect external sound
source
1
Connect the external sound source to
MP3 LINK socket by using a .5 mm cable.
2
Press SOURCE repeatedly until [MP3
LINK] is displayed.
3
Operate the external component (refer to
the instructions supplied with the external
component)
10 Product
information
Note
•
Product information is subject to change without prior
notice.
Power supply 12 V DC (11 V - 16 V),
negative ground
Fuse 15 A
Suitable speaker 4 - 8
impedance
Maximum power 50 W x 4 channels
output
Continuous power 22 W x 4 channels (4
output 10% T.H.D.)
Pre-Amp output 2.0 V ( USB play mode;
voltage 1 kHz, 0 dB, 10 k
load)
Subwoofer output 2.0 V (USB play mode:
voltage 61 Hz, 0 dB, 10 k
load)
Aux-in level 00 mV
Dimensions (W x H 182 x 5 x 112 MM
x D)
Weight 1.0 kg
Radio
Frequency range 87.5 - 108.0 MHz
- FM (Europe)
87.5 - 107.9 MHz
(American)
Frequency range 522 - 1620 KHz (Europe)
- AM(MW) 50 - 1710 HKz
(American)
Usable sensitivity 8 uV
- FM
Usable sensitivity 0 uV
- AM(MW) (S/N =
20 dB)
Frequency 0 Hz - 15 KHz
response
Stereo separation 0 db (1 kHz)
Signal/noise ratio >55 dB
Compatible USB devices:
• USB flash memory (USB 2.0 or
USB1.1)
• USB flash players (USB 2.0 or USB1.1)
• memory cards
Supported formats:
• USB or memory file format FAT12,
FAT16, FAT2 (sector size: 512 bytes)
• MP bit rate (data rate): 2-20 Kbps
and variable bit rate
WMA v9 or earlier
•
• Directory nesting up to a maximum
of 8 levels
• Number of albums/ folders: maximum
99
• Number of tracks/titles: maximum 999
• ID tag v2.0 or later
• File name in Unicode UTF8
(maximum length: 128 bytes)
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP/
WMA files, and is not be shown in the
display.
• Unsupported file formats are skipped.
For example, Word documents (.doc)
or MP3 files with extension .dlf are
ignored and not played.
• AAC, WAV, PCM audio files
EN 25