6
Place the rubber cushion over the end of
the bolt.
7
Slide the unit into the dashboard until a
click sound is heard.
•
If the unit cannot fi t into the
dashboard, remove the mounting
bracket on the both side of the unit
and replace them with the supplied
short mounting brackets.
8
Attach the trim plate.
EN
16
9
Reconnect the negative terminal of the car
battery.
Install remote control battery
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
Note
•
Remove batteries if they are exhausted or if the
remote control is not to be used for a long time.
•
Batteries contain chemical substances, they should be
disposed of properly.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
1
Open the battery compartment.
2
Insert 1 CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.