STONEX S10 User Manual page 6

4: GSM/WCDMA Network led (green):
The led is on when the network module is selected
as RTK data link. It starts to blink when receiving and
transforming data. (download in rover mode and
upload in base mode).
Fig. 2.6 - S10 Network led
5: BLUETOOTH led (blue):
Once S10 is connected with the controller this led
will switch on.
Fig 2.7 - S10 Bluetooth led
6: SATELLITE led (green):
The led blinks and shows the amount of locked
satellites. It starts to blink every 30 seconds for a
number of times equal to the number of locked
satellites.
Fig. 2.8 - S10 satellite led
5
Stonex S10 GNSS Receiver – User Manual