Teo 9104 Installation Instructions Manual page 18

Table of Contents

Advertisement

Teo IP Phone 9104 Installation Instructions
M
u
l
t
i
f
u
n
c
t
i
o
n
K
e
y
M
u
l
t
i
f
u
n
c
t
i
o
n
K
e
y
Multifunction keys can be configured for a variety of functions described below. On the IP
Phone 9104, multifunction keys are shown on up to five screen pages with six keys per
page, for a total of 30 keys. a yellow bar at the bottom indicates the current page. Press the
Page key to select a different page; additional pages of keys are available if they have been
configured by the UCM.
You can allow the user to customize keys on a per-key basis locally on the phone. Keys that
are designated "SET AT PHONE" can be configured by the user at the phone, and will not
be overwritten by a configuration update.
Note: Do not set any keys to "SET AT PHONE" if the phone is configured for hot desking. This
feature overwrites all key assignments.
These key functions are available:
LINE – first appearance of the primary line (extension number); LED indicator shows
line appearance status.
ADDITIONAL LINE – additional appearances of the primary line; LED indicator
shows line appearance status. LINE and ADDITIONAL LINE keys for a call
appearance must be consecutive. The ADDITIONAL LINE option is available only if
the preceding key is configured for a line appearance.
DSS/BLF (DIALOG) – initiates a call or picks up a ringing call to an assigned
extension; LED indicator shows the busy/ringing status of the assigned extension.
SPEED DIAL – initiates a call to a preconfigured number.
CALL PICKUP – initiates a directed call pickup.
HEADSET – on-hook/off-hook control for the headset port.
VOICEMAIL – initiates a call to the voicemail system; LED indicator shows message
waiting status.
LOCK – locks the phone to prevent unauthorized use, except for emergency calls;
LED indicator is on red when phone is locked.
MULTICAST – initiates a multicast page; LED indicator is on green when paging is
active.
SET AT PHONE – key is configured locally at the phone by the user. A configuration
update will not override the user's settings (not compatible with hot desking).
Blank – key is unused and cleared at the phone.
Page 18
S
e
t
t
i
n
g
s
S
e
t
t
i
n
g
s
13-280143 Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents