Table of Contents
Advertisement
N
e
t
w
o
r
k
R
e
s
o
u
r
c
e
N
e
t
w
o
r
k
R
e
s
o
u
r
c
e
Basic network information is typically provided by DHCP. SIP OPTIONS and SIP PROXY
SERVERS should be set explicitly via configuration download.
•
IP Address – To set the IP address, subnet mask, and default gateway statically,
uncheck AUTOMATICALLY OBTAIN FROM DHCP. Leaving the fields blank will allow
static network information to be set locally at the phone, otherwise set values as
desired.
•
DNS – To set the DNS server(s) statically, uncheck AUTOMATICALLY OBTAIN FROM
DHCP. Leaving the fields blank will allow static name server values to be set locally
at the phone, otherwise set values as desired.
•
NTP – To set the NTP server(s) statically, uncheck AUTOMATICALLY OBTAIN FROM
DHCP. Leaving the field blank will allow the time server(s) to be set locally at the
phone, otherwise set value as desired.
•
SYSLOG – To manually enable syslog, check ENABLE SYSLOG, and
and
SERVER ID
•
SIP OPTIONS – Change the TRANSPORT, NAT KEEP ALIVE, and NAT TIMER (SEC)
options if required by your network.
•
SIP PROXY SERVERS – Select +PROXY and enter the Teo UC server IP address or
fully qualified domain name and port. If a backup server is installed, enter that
address below the primary server. If no proxy server is entered, the primary server
address is assumed to be the same as the Update Server address.
13-280143 Rev. A
s
s
information.
LOG LEVEL
Configuration
fill in the
Page 17
Hide quick links:
Advertisement
Table of Contents
