CipherLab RS50 Reference Manual page 4

Important Notices
FOR PRODUCT WITH LASER
ENVIRONMENT
Operate the handy terminal at ambient temperatures from -20 °C to 50 °C

and with humidity range from 10% to 90%.
Store the device at ambient temperatures from -30 °C to 70 °C and with

humidity range from 5% to 95%.
Charge the device at ambient temperatures from 0°C to 35°C.

This device is built with a dust-proof and splash-proof structure that

conforms to protection class IP67.
SPECIFIC ABSORPTION RATE (SAR) INFORMATION
The product complies with the FCC portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the products can be kept as far as possible from the
user body or set the device to lower output power if such function is available.
The SAR test distance is Head (0 mm), Body (10 mm) and Hotspot (10 mm).
For body-worn operating conditions please use belt-clips, holsters, and/or accessories
that have no metallic component in the assembly and must provide at least 10mm
separation between the device and the user's body.
FCC SAR Value (Standard limit is 1.6 W/Kg)
USA (1g): Max. 1.54 W/Kg
A minimum separation distance of 0.5 cm must be maintained between the user's body and the
device, including the antenna during body-worn operation to comply with the RF exposure
requirements in Europe.
To compliance with RF Exposure requirements in Europe, third-party belt-clips, holsters or similar
accessories used by this device should not contain any metallic components. The use of accessories
that do not satisfy these requirements may not comply with RF exposure requirements, and should be
avoided.
CE SAR Value (Standard limit is 2 W/Kg)
EU (10g): Max. 1.6 W/Kg
SAFETY PRECAUTIONS
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
For people's safety

Do not listen at high volume levels for long periods to prevent possible

hearing damage.
Do not operate this device while walking, cycling or car driving.

For the equipment

This laser component emits FDA / IEC Class 2 laser light at

the exit port. Do NOT STARE INTO BEAM DIRECTLY.
Do not aim the beam at the eyes.

Any adjustments or performance excluding those specified may

result in hazardous laser light exposure.
- 4 -