CipherLab RS50 Reference Manual page 6

Important Notices
1) Open ReaderConfig and tap Scan Test on the menu bar.

2) Aim the scanning window at the barcode to read. Move the device,

having the barcode located in the center of the scanning area.
3) Press any of the two side triggers. The scanning light beams to read the

printed barcodes. The buzzer beeps after scanning. The scanning light goes off once
the data is decoded, or when the decode timeout period has passed.
Scan a 2D barcode

1) Open ReaderConfig and tap Scan Test on the menu bar.

2) Aim the scanning window at the barcode to read. Move the device,

having the barcode located in the center of the scanning area.
3) Press any of the two side triggers. The scanning light beams to read the

printed barcodes. The buzzer beeps after scanning. The scanning light goes off once
the data is decoded, or when the decode timeout period has passed.
- 6 -