Rubber Feet - HP 255 G6 Maintenance And Service Manual

Rubber feet

Description
Rubber feet, upper
Asteroid silver
Dark ash silver
Rubber feet, lower
Asteroid silver
Dark ash silver
Before removing the rubber feet, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
To remove the rubber feet:
Peel the lower rubber feet (1) and upper rubber feet (2) from the bottom of the computer.
▲
NOTE:
Reverse this procedure to install the rubber feet.
The lower feet and upper feet are different sizes.
Spare part number
931599-001
931600-001
931601-001
931602-001
Component replacement procedures 37