Reject Incoming Call - SoftBank 708SC User Manual

Hide thumbs Also See for 708SC:
Table of Contents

Advertisement

Ringtones
Specify ringtones for saved numbers by Phonebook
entry or Category ( P.5-4, 5-7). When no ringtone is
set, 708SC rings according to Profile Settings ( P.9-2).
Under following conditions, 708SC rings according to
2
each Mode; Secret Mode is set to Hide and
Phonebook(contains caller's number as an entry)'s
Secret Mode is set to On.
Incoming call window
If caller sends Caller ID, phone number appears; if
saved in Phonebook, name appears. When an image is
set in Phonebook or Category, image also appears
( P.5-4, 5-7). If caller hides Caller ID, Withheld
appears.
Under following conditions, no name/image appears;
Secret Mode is set to Hide and Phonebook(contains
caller's number as an entry)'s Secret Mode is set to On.
Missed call window
After an unanswered incoming call, Missed call
window appears. Press w (View), to open Missed Call
Log ( P.2-9).
2-4
When you cannot answer a call
Use Call Forwarding/Voice Mail to forward incoming
calls to a specified number automatically/to save
messages at Voice Mail Center. When Call Forwarding
or Voice Mail is set to No reply, press o (Busy) to
forward an incoming call immediately ( P.16-3, 16-5).
Use Answer Machine to record caller messages. Up to 3
messages (15 seconds per message) can be recorded in
708SC ( P.2-5).

Reject Incoming Call

Proactively disconnect an incoming call without
answering it. The rejected call is recorded in Missed.
AWhile 708SC rings/vibrates, press
y

Advertisement

Table of Contents
loading

Table of Contents