Table of Contents
Advertisement
To set/edit the image of Photo slide
aSelect Photo slide and press w (Edit)
bPerform Steps 2 to 4 in "Setting Photo Slide"
( P.8-2) or perform Steps 2 and 3 in "Editing
Photo Slide" ( P.8-3)
CPress c (Save)
Tip
• After setting mPet
mPet operations are enabled ( P.24-5). Press y to
show Standby as usual; various operations can be
performed.
Note
• With no pet selected in mPet, mPet world image
cannot be set as Wallpaper.
Photo Slide
APress c and select Tools → Photo
slide
BPress c (Add)
CSelect save location for the file, check
the image to set and press w (Done)
To see preview
aPress w (Preview) and select Yes
(Cropping the left and the right) or No
(Displaying in the original horizontal and
vertical ratio)
bPress C to close the preview
To set effect
aUse j to highlight Effect field
bUse s to toggle setting
To change the switching duration per still
image
aUse j to highlight Duration field
bUse s to highlight Effect field
DPress c (Set) and select Yes (crop
sides) or No (show full image)
8
8-3
Advertisement
Table of Contents
