Hpe 5510 24G Poe+ 4Sfp+ Hi - HPE 5510 HI Series Installation Manual

interface card slot. For more information about installing and removing an interface card, see
"Installing/removing an interface

HPE 5510 24G PoE+ 4SFP+ HI

Figure 49 HPE 5510 24G PoE+ 4SFP+ HI front panel
(1) 10/100/1000Base-T autosensing Ethernet port
(3) Management Ethernet port
(5) USB mini console port
(7) USB port
(9) SFP+ port
(11) Interface card status LED (SLOT)
(13) Power supply 1 status LED (PWR1)
(15) Management Ethernet port LED
Figure 50 HPE 5510 24G PoE+ 4SFP+ HI rear panel
1
(1) Grounding screw
(3) Fan tray 1
(5) Power supply 1
The HPE 5510 24G PoE+ 4SFP+ HI switch comes with power supply slot 1 empty and power supply slot
2 installed with a filler panel. You can install one or two power supplies for the switch as required. In this
figure, two PSR720-56A AC power supplies are installed in the power supply slots. For more
information about installing and removing a power supply, see "Installing/removing a ."
The HPE 5510 24G PoE+ 4SFP+ HI switch comes with a filler panel in the interface card slot. You can
select an interface card for the switch as required. In this figure, an LSWM2SP2PM interface card is
installed in the interface card slot. For more information about installing and removing an interface card,
see "Installing/removing an interface
card."
1 2
2 3
(2) 10/100/1000Base-T autosensing Ethernet port LED
(4) Console port
(6) Port LED mode switching button
(8) System status LED (SYS)
(10) Port mode LED
(12) Power supply 2 status LED (PWR2)
(14) SFP+ port LED
4
(2) Interface card
(4) Fan tray 2
(6) Power supply 2
card."
48
3 4 5 6
14 12 10
11
15 13
5 6
7
8
9