Accessing the switch for the first time
Setting up the configuration environment
You can access the HPE 5510 HI switch through the serial port or the mini USB port. HPE recommends
that you access the switch through the serial port by using the provided console cable. To access the
switch through the mini USB port, you need to prepare the mini USB console cable.
Figure 32 Connecting the console port to a terminal
Connecting the console cable
A console cable is an 8-core shielded cable, with a crimped RJ-45 connector at one end for connecting
to the console port of the switch, and a DB-9 female connector at the other end for connecting to the
serial port on the console terminal.
Figure 33 Console cable
A side
Pin 9
Pin 1
Table 8 Console port signaling and pinout
RJ-45
1
2
A
Signal
RTS
DTR
Main label
DB-9
8
6
29
B side
8
B
1
Signal
CTS
DSR